Table of Contents
Advertisement
Item
Item
LED
LED
1
Fault or Locate
2
Online or Activity
EDSFF SSD LED definitions
EDSFF SSD LED definitions
The server supports hot-plug Enterprise and Data Center Standard Form Factor (EDSFF) NVMe SSDs in the E3.S form factor .The E3.S drive
carrier has two LEDs:
Amber/blue LED—Managed by the drive backplane in conjunction with the storage controller and is used to indicate drive status.
Green LED—Managed by the drive itself and indicates the drive activity.
Status
Status
Definition
Definition
Solid amber
This drive has failed, is unsupported, or is invalid.
Solid blue
A management application has identified the drive and the drive is
operating normally.
Flashing amber or blue
The drive has failed, or a predictive failure alert has been received
(1 flash per second)
for this drive. A management application has also identified the
drive.
Flashing amber (1 flash
A predictive failure alert has been received for this drive. Replace
per second)
the drive as soon as possible.
Off
The drive is operating normally.
Solid green
The drive is online and not active.
Flashing green (1 flash
The drive is doing one of the following:
per second)
Flashing green (4
The drive is operating normally.
flashes per second)
Off
The drive is not configured or is a spare drive.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide
Rebuilding or performing a RAID
Performing a stripe size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Activating a replacement drive
94
Advertisement
Table of Contents
