HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 68

CAUTION: To prevent possible server malfunction and damage to the equipment, multiprocessor configurations must CAUTION:
contain processors with the same part number.
CAUTION: If installing a processor with a faster speed, update the system ROM before installing the processor. CAUTION:
To download firmware and view installation instructions, see the Hewlett Packard Enterprise Support Center website
CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the socket or processor,
do not touch the contacts.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack.
b. Remove the server from the rack.
5. Remove the access panel.
6. Allow the heatsink to cool.
7. Remove the heatsink:
CAUTION: CAUTION:
To prevent mechanical damage or depositing oil on your hands or other contaminant to the heatsink contact surface,
hold the heatsink only by the edge of its base plate. Do not touch the heatsink fins.
a. Review the heatsink screw numbering on the heatsink label.
b. Loosen the heatsink screw numbers 6, 5, 4, and 3 in a diagonal manner (callouts 1 to 4).
Hewlett Packard Enterprise Support Center website .
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 68