Table of Contents
Advertisement
This retention frame is spring-loaded. Once the screw is loosened enough, hold the retention frame as it automatically pivots to a
vertical position (callout 2) .
b. Hold the lift tabs and pivot the rail frame to the vertical position (callout 1).
c. Slide the processor out of the rail frame (callout 2).
CAUTION: The pins on the processor socket and on the processor are very fragile and easily damaged
CAUTION:
The pins on the processor socket and on the processor are very fragile and easily damaged . To avoid
component damage, do not touch these pins
processor.
12. Do not touch the pin field on the socket and the processor contacts.
do not touch these pins. Any damage to them might require replacing the system board and/or
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide
70
Advertisement
Table of Contents
