HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 81

Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the system battery Removing and replacing the system battery
About this task About this task
The system battery provides power to the real-time clock. If the server no longer automatically displays the correct date and time, you might
need to replace the system battery.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery WARNING:
pack. A risk of fire and burns exists if the battery pack is not properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not expose the battery to extremely low air pressure as it might lead to explosion or leakage of flammable liquid or
gas.
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace only with the spare designated for this product.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 81