HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 37

Removing and replacing the front bezel Removing and replacing the front bezel
Procedure Procedure
1. If installed, remove the Kensington security lock.
For more information, see the lock documentation.
2. Press the bezel release latch (callout 1), and then pivot the bezel open (callout 2).
3. Release the right side of the bezel from the front panel (callout 3).
To replace the front bezel, reverse the removal procedure.
Removing and replacing the cable management arm Removing and replacing the cable management arm
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 37