HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 53

Results Results
To replace the component, reverse the removal procedure.
Removing and replacing a primary riser card Removing and replacing a primary riser card
About this task About this task
Secondary risers are spared with the riser cage.
CAUTION: CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all AC power cords
before removing or installing the PCI riser cage.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 53