HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 34

Remove the server from the rack Remove the server from the rack
Prerequisites Prerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
About this task About this task
WARNING: WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before
extending anything from the rack.
Procedure Procedure
1. Power down the server.
2. Release the cable management arm .
3. Disconnect the cabling from the rear panel.
4. Extend the server from the rack .
5. Remove the server from the rack:
6. Place the server on a sturdy, level surface.
Remove the access panel Remove the access panel
About this task About this task
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 34