HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 46

2. Immediately install the replacement power supply blank spare.
Removing and replacing a hot-plug AC power supply Removing and replacing a hot-plug AC power supply
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items:
Components included with the hardware kit
No. 1 Phillips screwdriver
About this task About this task
WARNING: WARNING:
To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Unplug the power cord from the power supply to disconnect power to the equipment.
Do not route the power cord where it can be walked on or pinched by items placed against it. Pay particular attention
to the plug, electrical outlet, and the point where the cord extends from the server.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 46