HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 39

4. Remove the cable management arm:
a. Press and hold the blue PUSH
b. Swing the arm away from the mounting rail (callout 2).
c. Press and hold the blue PUSH
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the enclosure Removing and replacing the
PUSH button on the retention bracket (callout 1).
PUSH buttons on the outer and inner tabs and detach from the enclosure rails (callouts 3 and 4).
enclosure rails rails
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 39