HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 55

Results Results
To replace the component, reverse the removal procedure.
Removing and replacing a GPU in the riser cage Removing and replacing a GPU in the riser cage
About this task About this task
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to
cool before touching them.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage.
6. If applicable, disconnect the GPU power cable, and then remove the GPU from the riser.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 55