HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 60

Results Results
To replace the component, reverse the removal procedure.
Removing and replacing a DIMM Removing and replacing a DIMM
Prerequisites Prerequisites
Before replacing memory, read the memory configuration and population guidelines in the server user guide.
About this task About this task
CAUTION: CAUTION:
Failure to properly handle DIMMs can damage DIMM components and the system board connector.
To identify DIMMs installed in the server, see "."
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the DIMM.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 60