HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 59

6. Remove the controller.
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing a type-p storage controller Removing and replacing a type-p storage controller
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage.
6. Disconnect any cables from the controller
Note the port numbers before disconnecting the cables.
7. Remove the controller.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 59