HPE ProLiant DL365 Gen11 Maintenance And Service Manual page 67

Item Item Description Description
1 Processor socket
2 Pin field cover cap
3 Processor carrier
4 Rail frame lift tabs
5 Retention frame screw (T-20)
6 Retention frame
7 Rail frame
8 Processor
Removing a processor Removing a processor
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-20 screwdriver
Two 1.0 gm (0.5 ml) or four 0.5 gm (0.25 ml) of thermal grease
Alcohol wipe
About this task About this task
Before performing this procedure, Hewlett Packard Enterprise recommends identifying the processor and socket components .
Procedure Procedure
1. Observe the following alerts.
CAUTION: To avoid damage to the processor or system board, only authorized personnel should attempt to replace or CAUTION:
install the processor in this server.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 67