Symbols On Equipment - HPE ProLiant DL365 Gen11 Maintenance And Service Manual

WARNING: WARNING:
To reduce the risk of personal injury or damage to the equipment, be sure that:
The rack has anti-tip measures in place. Such measures include floor-bolting, anti-tip feet, ballast, or a combination as
specified by the rack manufacturer and applicable codes.
The leveling jacks (feet) are extended to the floor.
The full weight of the rack rests on the leveling jacks (feet).
The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled together in multiple rack installations.
WARNING: WARNING:
To reduce the risk of personal injury or equipment damage when unloading a rack:
At least two people are needed to safely unload the rack from the pallet. An empty 42U rack can weigh as much as 115
kg (253 lb), can stand more than 2.1 m (7 ft) tall, and might become unstable when being moved on its casters.
Never stand in front of the rack when it is rolling down the ramp from the pallet. Always handle the rack from both
sides.
CAUTION: CAUTION:
Always plan the rack installation so that the heaviest item is on the bottom of the rack. Install the heaviest item first, and
continue to populate the rack from the bottom to the top.
CAUTION: CAUTION:
Before installing the server in a enclosure, be sure to properly scope the limitations of the enclosure. Before proceeding
with the installation, consider the following:
You must fully understand the static and dynamic load carrying capacity of the enclosure and be sure that it can
accommodate the weight of the server .
Be sure sufficient clearance exists for cabling, installation and removal of the server , and movement of the rack doors.

Symbols on equipment

Symbols on equipment
The following symbols may be placed on equipment to indicate the presence of potentially hazardous conditions:
This symbol in conjunction with any of the following symbols indicates the presence of a potential hazard. The potential for injury
exists if warnings are not observed. Consult your documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualified personnel.
HPE ProLiant DL365 Gen11 Server Maintenance and Service Guide 29