Kyocera TASKalfa 7002i Service Manual page 553

7. Remove four screws (a)(M4x8) and
remove the connector mounting plate
(b).
8. Remove three screws (a)(M4x8) and
then remove the PF drive unit (b) while
pulling lower side.
9. Check or replace the lift motor and PF
drive unit and then reattach the parts in
the original position.
a
a
a
a
a
4-225
2WA/2NJ/2RK
b
Figure 4-342
b
Figure 4-343
14j0526
14j0527