Adjust Color; Set Internal Input Source Parameters - NovaStar CX40 Pro User Manual

Note
Using the HDR function reduces the CX40 Pro load capacity by less than half if the CX40 Pro works with the CA50E,
CA50C and XA50 receiving cards. For details, see chapter

6.1.4 Adjust Color

Set the input source color adjustment parameters.
On the main menu screen, choose Input > Select Source to select an external video source (HDMI, DP or SDI).
Figure 6-5 Color adjustment
Select Input Color.
Set relevant parameters based on the on-site situation.
Parameter
Black Level
Contrast
Saturation
Hue
Red Shadow/Green
Shadow/Blue Shadow
Red Highlight/Green
Highlight/Blue Highlight

6.2 Set Internal Input Source Parameters

Select the internal source stored in the device and set the related parameters for screen testing and troubleshooting.
On the main menu screen, choose Input > Select Source to select an internal source.
www.novastar.tech
Description
It is used to adjust the brightness of the dark areas of the image. The smaller the value,
the darker the dark part of the screen.
It is used to adjust the brightness of the highlight areas of the image. The greater the
value, the brighter the highlight part of the screen.
Contrast and black level together affect the overall contrast of the image.
It is used to adjust the color purity of the image. The greater the value, the more vivid the
color.
It is used to adjust the color effect of the displayed image color.
It is used to adjust the brightness of the dark areas of the image. The principle is the same
as that of black level, but only the RGB components are adjusted.
It is used to adjust the brightness of the highlight areas of the image. The principle is the
same as that of contrast, but only the RGB components are adjusted.
CX40 Pro LED Display Controller User Manual
11 Ethernet Port Load Capacity.
18