Table of Contents
Advertisement
6
Display Effect Adjustment
6.1 Set External Input Source Parameters
6.1.1 Check Input Source Information
Check the attribute values of the input source, including the resolution, frame rate, bit depth, color gamut, etc.
On the main menu screen, choose Input > Select Source to select an external video source (HDMI, DP or SDI).
Figure 6-1 Select source
Choose
input source
Figure 6-2 Input info
Check the input source information.
6.1.2 Set Resolution and Frame Rate (HDMI and DP only)
Set the resolution and frame rate of the input source. If the resolutions of the input source and screen are the same,
the image can be displayed pixel to pixel. A lower frame rate may result in image flickering, while a higher frame rate
helps stabilize the display image.
On the main menu screen, choose Input > Select Source to select an external video source (HDMI, DP).
www.novastar.tech
> Info. The
input source
is the video source you selected in the previous step.
CX40 Pro LED Display Controller User Manual
16
Advertisement
Table of Contents
