Slc Interface - AB Quality Allen-Bradley 1394 User Manual

SLC Interface

The GMC Turbo (catalog number 1394x-SJTxx-T) can connect
directly to an SLC 5/03, 5/04, or 5/05 back plane using a 1746-C7
or -C9 cable. The SLC processor recognizes the GMC Turbo as an
intelligent SLC module.
The GMC Turbo supports the transfer of input/output image files and
M0/M1 files.
If you are using: Refer to:
GML Commander Reference
GML Commander 4. x.x
Manual
GML Programming Manual,
Document Update
GML 3. x.x
GML Programming Manual,
Document Update
The figure below shows the location of the GMC Turbo to SLC
connectors.
Figure 4.16
Connecting a GMC Turbo to an SLC
1746 Rack with
SLC 5/03, 5/04, or 5/05
!
Wiring 1394 GMC and GMC Turbo Systems
Publication number:
GMLC-5.2
999-104-DU1
999-104-DU1.1
SLC right side
connector
SLC IN
connector
SLC OUT
connector
ATTENTION: To avoid injury or damage to equipment
do not install SLC interface cables (catalog numbers
1746-C7 and 1746-C9) while the unit(s) is powered up.
ATTENTION: SLC Interface faults will not
automatically shut down or stop the axes or application
program operating in the 1394 GMC Turbo. These
conditions must be handled in a safe manner with the
user's application program.
4-17
For this information:
Programming
Programming
1394 SLC Interface
1394 GMC Turbo System
Publication 1394-5.0 — May 2000