AB Quality Allen-Bradley 1394 User Manual page 40

2-10 Installing Your 1394 (applies to all systems)
Publication 1394-5.0 — May 2000
6. Slide the slide-and-lock mechanism on the axis module to the left
until it locks into place.
Figure 2.8
Slide-and Lock Mechanism
Status
DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
7.
If you:
Have more axis modules for this system
module
Do not have more axis modules for this
system module
8. Install the lower fasteners for the system module and all axis
modules.
9. Attach the terminator to the last axis module. Slide it to the left
until it locks in place.
Figure 2.9
Attaching the Terminator
Status
DANGER
RISK OF ELECTRICAL SHOCK. HIGH VOLTAGE MAY
EXIST UP TO FIVE MINUTES AFTER REMOVING POWER.
Important: The terminator terminates the serial ring and provides
protection for the DC Link. The 1394 system will not
operate without the terminator.
10. Tighten all mounting fasteners.
Slide-and-Lock
Mechanism
Do this:
Go to main step 3.
Go to main step 8.
Attach the
Terminator