Chapter Objectives
Complying With European Union
Directives
Installing Your 1394
(applies to all systems)
This chapter covers the following topics:
•
Complying with European Union directives
•
Before mounting your system
•
Unpacking your modules
•
System mounting requirements
•
Bonding your system
•
Mounting your 1394 system
•
Mounting your 1394-DCLM
•
Mounting the external shunt resistor for 5 and 10 kW system
modules
•
Mounting external shunt modules for 22 kW system modules
•
Mounting considerations for GMC and GMC Turbo systems
ATTENTION: The following information is a
guideline for proper installation. The National
!
Electrical Code and any other governing regional or
local codes overrule this information. The Allen-
Bradley Company cannot assume responsibility for the
compliance or the noncompliance with any code,
national, local or otherwise, for the proper installation
of this system or associated equipment. If you ignore
codes during installation, hazard of personal injury
and/or equipment damage exists.
If this product is installed within the European Union or EEC regions
and has the CE mark, the following regulations apply.
EMC Directive
This unit is tested to meet Council Directive 89/336 Electromagnetic
Compatibility (EMC) using a technical construction file and the
following standards, in whole or in part:
•
EN 5008x-2 EMC - Emission Standard, Part 2 - Industrial
Environment
•
EN 5008x-2 EMC - Immunity Standard, Part 2 - Industrial
Environment
2
Chapter
Publication 1394-5.0 — May 2000