Placing The Him In The Him Cradle - AB Quality Allen-Bradley 1394 User Manual

C-16 Using the Human Interface Module (HIM)
Publication 1394-5.0 — May 2000

Placing the HIM in the HIM Cradle

To put the HIM in the HIM cradle:
1. If it's not already connected, connect the SCANport cable to the
HIM.
2. With the keypad facing you, slide the top of the HIM up into the
HIM cradle and push the bottom end of the HIM into the cradle
until the tabs latch the HIM. The tabs lock the HIM into place.