AB Quality Allen-Bradley 1394 User Manual page 113

Wiring Your 1394 Analog Servo System 5-3
Figure 5.2
Terminal Operating Tool
Hook
Flat tab
Insert wire
here
To use the terminal operating tool with TB1:
1. Put the hook into the hook slot with tab end of the tool to your
left.
2. Gently push the tool to the right to open the wire slot.
3. Insert the wire.
4. Gently release the tool by moving it to the left.
5. Reverse directions for TB2.
Publication 1394-5.0 — May 2000