Pasting A System's Information - AB Quality Allen-Bradley 1394 User Manual

Using the Human Interface Module (HIM)
10. Repeat steps 8. through 10. until the complete name you want
appears.
11. Press ENTER. The cursor moves to the location number.
12. Press ENTER. A message similar to the following appears:
Note: The version number on the bottom of the display represent
the firmware revision of the information that you will copy.
13. Press ENTER. The copy begins and a message similar to the
following appears:
Note: The numbers of the parameters scroll as they are copied and
more solid boxes appear on the bottom to show the status
of the copy.
When the copy is complete, a message similar to the following
appears:
14. Press ESC. A message similar to the following appears:

Pasting a System's Information

To place one system's information into another system using Copy
Cat:
1. Connect the HIM to the system into which you want to paste the
information stored in the HIM.
2. At the HIM, press ENTER. A message similar to the following
appears:
3. Press either the up or down arrow key until the following appears:
4. Press ENTER. The system records your choice and the following
message appears:
5. Press either the up or down arrow key until the following appears:
B1394 Servo Drv
Version 3.00
Drive -> HIM ##
Drive --> HIM ###
Completed
Choose Mode
EEPROM
Choose Mode
Display
Choose Mode
EEPROM
EEPROM
Save Values
EEPROM
HIM -> Drive
Publication 1394-5.0 — May 2000
C-9