AB Quality Allen-Bradley 1394 User Manual page 56

3-10 Wiring System, Axis, and Shunt Modules, and Motors (for all systems)
Publication 1394-5.0 — May 2000
Figure 3.5
Removing the Input Wiring Board in a 22 kW System Module
Disconnect both sides of
the ribbon cable
Remove both input
wiring board screws and
remove the input wiring board
6. Locate the ground jumper inside the system module. Refer to the
figure below for jumper location.
Figure 3.6
Location of the 22 kW System Module Ground Jumper
Ground Jumper