IBM eserver 630 6C4 Service Manual page 164

Table 2. Firmware Checkpoints (continued)
Checkpoint
E5E0
E5E1
E5E2
E5E3
E5E4
E5E5
E5E6
E5E7
E5E8
E5E9
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
144
Description
Initialize system processor array
Reserved
Initialization of the hypervisor,
phase 1
Not in quick-restart: load and set up
open firmware code in memory
Activate slave processors
Initialize the hypervisor, phase 2
Set L2 and processor status
Save I/O hub information for RTAS
and open firmware
Set up registers
Reset the quick restart path
Action/
Possible Failing FRU
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.
1. Check for system firmware
updates.
2. Go to "MAP 1540: Minimum
Configuration" on page 101.