Table of Contents
Advertisement
Table 2. Firmware Checkpoints (continued)
Checkpoint
E1F3
E1F4
E1F5
E1F6
E1F7
E1F8
E1F9
E1FA
E1FB
E1FD
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
140
Description
Privileged-access password prompt
End self-test sequence on boot
devices; begin SMS.
Build boot device list
Determine boot device sequence
No boot image located
Building boot device list for SCSI
adapters. (The location of the SCSI
adapter being scanned is also
displayed.)
Building boot device list for
fibre-channel adapters. (The
location of the SAN adapter being
scanned is also displayed.)
Building boot device list for SCSI
adapters. (The device ID and the
device LUN being scanned are also
displayed.)
Scan SCSI bus for attached
devices
The operator panel alternates
between the code E1FD and
another Exxx code, where Exxx is
the point at which the error
occurred.
Action/
Possible Failing FRU
The prompt should be visible on the
firmware console (maybe a VTERM
on the HMC).
If a console is attached but nothing
is displayed on it, go to the "Quick
Entry MAP" on page 58 with the
symptom "All display problems."
Go to "MAP 1540: Minimum
Configuration" on page 101.
Go to "MAP 1540: Minimum
Configuration" on page 101.
Go to "MAP 1540: Minimum
Configuration" on page 101.
Go to "Boot Problems/Concerns" on
page 150.
1. If a location code is available,
follow the Repair actions listed
for error code 21A0 00XX.
2. If no location code is available,
go to "MAP 1540: Minimum
Configuration" on page 101.
1. If a location code is available,
follow the Repair actions listed
for error code 21A0 00XX.
2. If no location code is available,
go to "MAP 1540: Minimum
Configuration" on page 101.
Go to "MAP 1540: Minimum
Configuration" on page 101.
1. If a location code is available,
follow the Repair actions listed
for error code 21A0 00XX.
2. If no location code is available,
go to "MAP 1540: Minimum
Configuration" on page 101.
1. If a location code is available,
follow the actions listed for error
code 21A0 00xx.
2. If no location code is available,
go to "MAP 1540: Minimum
Configuration" on page 101.
Advertisement
Table of Contents
