11. From the bottom of the processor assembly, lift the side access cover. Four hinges
hold the cover to the top of the processor assembly. Pivot the cover up to reveal
the memory DIMMs or DIMM connectors.
12. Remove all memory DIMMs as described in "Memory DIMM Removal" on
page 430. Put the DIMMs in a safe place (you will need to install these DIMMs
onto the new processor card).
Model 6C4
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
426
1 Service Access Cover
2 Processor Access Cover
3 Processor Assembly Lifting and
Release Handles
4 Processor Assembly
5 Processor Card
6 Memory DIMMs
7 Model 6C4
8 Optional Media Device (for
example: Diskette Drive or
Tape Drive)
9 IDE CD-ROM Drive
10 Front Bezel
11 Media Device Support Shelf
12 Processor Filler