Table of Contents
Advertisement
Procedure List
Procedure
Adapters
Battery Replacement
Bezels
Bezel Door
Cable Management Arm
CD-ROM Drive
CEC Backplane
Covers
Disk Drive
Disk Drive Backplane
Disk Drive Configuration or
Deconfiguration
Diskette Drive
Fans
HMC
I/O Card
Media Drives
Memory DIMMs
Operating Position
Operator Panel
PCI Riser Card
Power Supply
Processor Card
Rack Installation
Release Latch and Brackets "Model 6C4 Drawer Release Latch and Brackets" on page 351
Service Position
Starting the System
Static-Sensitive Devices
Stopping the System
System Board
Rack Hardware
VPD Update
Procedure Name and Page Location
"PCI Adapters" on page 371
"Replacing the Battery" on page 436
"Bezels" on page 369
"Bezel Door (Model 6E4)" on page 368
"Installing the Cable-Management Arm" on page 505
"Media Drives (Diskette, CD-ROM, Tape, or Disk Drive)" on
page 399
"Central Electronics Complex (CEC) Backplane" on page 450
"Covers" on page 357
"Hot-Plug Disk Drives" on page 403
"Disk Drive Backplane" on page 414
"Deconfiguring (Removing) or Configuring a Disk Drive" on
page 403
"Media Drives (Diskette, CD-ROM, Tape, or Disk Drive)" on
page 399
"Fans" on page 391
Appendix E, "Install a Hardware Management Console (HMC)" on
page 507
(Refer to PCI Riser Card)
"Media Drives (Diskette, CD-ROM, Tape, or Disk Drive)" on
page 399
"Memory DIMMs" on page 430
"Returning the Model 6C4 to the Operating Position" on page 356
"Operator Panel" on page 419
"PCI Riser Card" on page 408
"Power Supplies" on page 441
"Processor Card" on page 425
"Model 6C4 Removal and Installation into a Rack" on page 502
"Placing the Model 6C4 into the Service Position" on page 355
"Starting the System" on page 350
"Handling Static-Sensitive Devices" on page 348
"Stopping the System" on page 350
(Refer to CEC Backplane)
"Attaching the Mounting Hardware to the Rack Enclosure" on
page 494
"System Vital Product Data (VPD) Update Procedure" on page 423
Chapter 9. Removal and Replacement Procedures
349
Advertisement
Table of Contents
