Table of Contents
Advertisement
Hot-Swap Processor Fan Removal
If you are servicing one of the processor cooling fan assemblies, do the following:
1. Lift the processor fan access cover.
2. Place your thumb and index finger into the two finger holes, located on the top of
the faulty fan.
3. Lift the faulty fan out of the system.
Notes:
a. The processor cooling fans have a docking connector, located on the bottom of
b. Unless you are performing a hot-swap removal or replacement of the processor
Note:
Hot-Swap PCI Adapter Fan Removal
Attention:
not been exchanged within five minutes.
If you are servicing one of the PCI adapter cooling fan assemblies, do the following:
1. Disconnect the cooling fan's power cable from the connector, located on the front of
the fan assembly.
2. Place your index finger below the front connector and slide the fan out of the fan
cage.
Note: The adapter cooling fan assemblies are arranged in stacked pairs. You
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
394
the fan assembly. The docking connectors automatically disconnect as the fan is
being removed from the chassis.
fans, keep the processor fan access cover closed .
The system will power off in the event that the failing PCI cooling fan has
cannot replace a single fan in the stacked pair.
Advertisement
Table of Contents
