Table of Contents
Advertisement
16. Lower the tab onto the PCI adapter face plate. Rotate the adapter retainer clip
clockwise until it covers the tab at approximately a 45-degree angle. See the
following illustration.
17. Replace the service access cover as described in "Service Access Cover
Replacement (Model 6C4)" on page 357 or "Service Access Cover Replacement
(Model 6E4)" on page 364.
18. On a Model 6C4, push the system drawer back into the operating position as
described in "Returning the Model 6C4 to the Operating Position" on page 356.
19. Connect the adapter cables.
20. On a Model 6C4, route the cables through the cable-management arm.
21. On a Model 6C4, close the rack doors.
On a Model 6E4, close the bezel door.
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
390
1 System Unit
2 Adapter Retainer Assembly (in the unlocked position)
3 Adapter Retainer Assembly (retainer seat down and the retainer
clip in the unlocked position)
4 Adapter Retainer Assembly (retainer seat down and the retainer
clip in the locked position)
5 PCI adapter face plate (dotted lines)
Advertisement
Table of Contents
