Table of Contents
Advertisement
Table 6. Service Processor Error Codes. (continued)
Error Code Description
4503 309E Description: 1 GB DIMM fault
Action: This error code indicates that the memory repeat gard function has
deconfigured a quad of memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the
system information menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of
"manually deconfigured", reconfigure the DIMMs and boot the system to the
SMS menus. Shut down the system using the white power button and look
again at the status of the DIMMs.
If all of the DIMMs are still configured in the memory
configuration/deconfiguration menu, the problem has been resolved.
If any of the DIMMs have a status of "deconfigured by the system", either
before or after the boot to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location
code. The entire quad of memory must be replaced.
4503 309F Description: 1 GB DIMM fault
Action: This error code indicates that the memory repeat gard function has
deconfigured a quad of memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the
system information menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of
"manually deconfigured", reconfigure the DIMMs and boot the system to the
SMS menus. Shut down the system using the white power button and look
again at the status of the DIMMs.
If all of the DIMMs are still configured in the memory
configuration/deconfiguration menu, the problem has been resolved.
If any of the DIMMs have a status of "deconfigured by the system", either
before or after the boot to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location
code. The entire quad of memory must be replaced.
4503 30AA Description: 2 GB DIMM fault
Action: This error code indicates that the memory repeat gard function has
deconfigured a quad of memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the
system information menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of
"manually deconfigured", reconfigure the DIMMs and boot the system to the
SMS menus. Shut down the system using the white power button and look
again at the status of the DIMMs.
If all of the DIMMs are still configured in the memory
configuration/deconfiguration menu, the problem has been resolved.
If any of the DIMMs have a status of "deconfigured by the system", either
before or after the boot to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location
code. The entire quad of memory must be replaced.
Action/
Possible Failing FRU
Chapter 5. Error Code to FRU Index
233
Advertisement
Table of Contents
