Table of Contents
Advertisement
Step 1322-36
From the HMC VTERM window of a partition in the list of "Axx" partitions, type diag at
the AIX command prompt.
Step 1322-37
1. When the diagnostic operating instructions are displayed, press Enter.
2. Select the Task Selection option.
Note: If the terminal type is not defined, you are prompted to define it before you
3. Select the Log Repair option.
4. Select the resource associated with the repair action. If the repair action was
reseating a cable or adapter, select the resource associated with that repair action.
If the resource associated with your repair action is not displayed on the Resource
List, select sysplanar0.
5. Press commit after you have made your selection.
Step 1322-38
Exit from diagnostics in this partition and return to the AIX prompt.
Step 1322-39
Have all the partitions in the list of "Axx" partitions(s) you began recording in
"Step 1322-14" on page 87 been processed?
No
Yes
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
90
can proceed.
Go to "Step 1322-35" on page 89 to process the next partition in the list you
recorded in "Step 1322-14" on page 87.
This completes the repair, return the system to the customer.
Note: If during the processing of the list of open service action events, some
service actions events were left open, further service actions may be
required to complete the repair.
Advertisement
Table of Contents
