Table of Contents
Advertisement
13. Rotate the locking retainer clip, lift the plastic stop, and remove the expansion slot
cover.
1 System Unit
2 Adapter Retainer Assembly
3 Adapter Retainer Assembly (retainer
seat down and the retainer clip in the
locked position)
4 Adapter Retainer Assembly (retainer
seat down and the retainer clip in the
unlocked position)
14. Follow the instructions on the screen to install the adapter until the LED for the
specified PCI slot is set to the Action state. See "Component LEDs" on page 476.
15. When you are instructed to install the adapter in the adapter slot, carefully grasp
the adapter by the edges and align the adapter in the slot guides. Insert the
adapter fully into the adapter slot connector. If you are installing a full-length
adapter, ensure that both ends of the adapter engage the card guides.
5 PCI adapter face plate (dotted lines)
6 Adapter Retainer Assembly (in the
unlocked position)
7 PCI Adapter
Chapter 9. Removal and Replacement Procedures
389
Advertisement
Table of Contents
