Mitsubishi Electric GT11 User Manual page 61

Graphic operation terminal
Hide thumbs Also See for GT11:
Table of Contents

Advertisement

(2) Bus connection cable
The following products are used in the EMC specification compatibility test conducted by Mitsubishi
Electric Corporation.
• ZCAT3035-1330 ferrite core manufactured by TDK corporation
• AD75CK-type cable clamp manufactured by MITSUBISHI
• Zipper tube SHNJ type manufactured by Zippertubing(Japan),Ltd.
GOT Unit
GT15-QC
GT1155-QTBDQ
Peel the sheath at both ends of the cable, and expose the shield
GT1155-QSBDQ
braided wire for grounding. (For grounding with clamps. (refer to
GT1150-QLBDQ
Grounding the cable.))
GT15-C
Peel the sheath at both ends of the cable, and expose the shield
braided wire for grounding. (For grounding with clamps. (refer to
GT1155-QTBDA
Grounding the cable.))
GT1155-QSBDA
Other bus connection cables modified as shown in EX.4.
GT1150-QLBDA
Wind cable shield material around the cable, and pull out the
grounding braided wire of the cable shield material.
Attach the ferrite core to the cable in the specified position and
insert the braided wire for grounding into the ferrite core.
EX.2
Programmable
controller
EX.3
Programmable
controller
/GOT units
EX.4
Programmable
controller
Existing Cables
B, GT15-QC
BS modified as shown in EX.2.
BS, GT15-C
EXSS-S1 modified as shown in EX.3.
40mm
360mm or less
(14.17inch)
(1.57inch)
Ferrite Core
(ZCAT3035-1330)
Ground wires
60mm or less
(280mm (11.0 inch))
(2.36inch)
360mm or less
40mm
(14.17inch)
(1.57inch)
(ZCAT3035-1330)
80mm
Cable shield material
(3.15inch)
Grounding braided wire
(200mm (7.87 inch))
40mm or less
Grounding braided wire
(1.57inch)
(50mm (1.97 inch))
5.2.3 Wiring Precautions the Part which Matches the EMC Directives
The cable need to be independently
tested by the user to demonstrate EMC
compatibility when they are used with the
GOT, the PLC of MELSEC-Q series,
MELSEC-QnA series, and MELSEC-A
series.
40mm
360mm or less
(14.17inch)
(1.57inch)
60mm or less
(2.36inch)
360mm or less
40mm
(14.17inch)
(1.57inch)
Ferrite Core
(3.15inch)
40mm or less
(1.57inch)
5.2 EMC DIRECTIVE
User Made Cables
GOT units
GOT units
GOT
units
80mm
5 - 6
1
2
3
4
5
6
7
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Got1000

Table of Contents