Mitsubishi Electric GT11 User Manual page 193

Required Extended function OS
4
(1) The Extended function OS shown in the table below is required.
Extended function OS
System monitor
(2) Install the Extended function OS.
Install System monitor (Extended function OS) in the GOT.
For a detailed installation procedure, see the following:
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Devices that can be monitored
5
For further information about the monitor device names that can be monitored and the scope,
see the following:
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
Access range
6
When the GOT is connected to the remote I/O station in MELSECNET/H network system,
only the master station can be monitored.
The access range other than above is the same as the access range when the GOT is connected
to a controller.
Refer to the following manual for details of the access range.
GT Designer2 Version
GOT1000 Series Connection Manual (Mitsubishi Products) for GT Works3
OS memory space (user area)
0KB
Basic Operation/Data Transfer Manual
Screen Design Manual
Screen Design Manual
Option function board
Not required
14.2 System Monitor
14.2.1 Specifications
9
10
11
12
13
14
15
16
14 - 11