Mitsubishi Electric GT11 User Manual page 228

14 - 46
14.2 System Monitor
14.2.28 Test operation procedure
Operating the set values of timers and counters
(1) Time-up/Count-up status
Even if a set value or present value is changed after a timer or counter is up, the
time-up or count-up status does not change. The present status is retained.
(2) Changing an index qualifier
Only the constant part of a T/C set value with a qualifier can be changed. The
index qualifier cannot be changed.
(Example) Change the set value of T5 from 300 to 200.
Program before change
K300
T5
Constant part
(3) Operation when a password is entered for the controller
When the target controller is a QCPU, the Keyword Release screen appears.
Enter the password.
1)
Change the set value of
T5 from K300 to K200.
Z2
The index qualifier cannot be changed.
Enter the password entered in the sequence program
1
at 1).
A-Z
• key : Touch this key to enter alphabetic
characters A to Z (uppercase).
a-z
• key : Touch this key to enter alphabetic
characters a to z (lowercase).
• 0-9 key : Touch this key to enter numbers 1 to 9.
• key : Use this key to delete an entered
Del
character.
• key : Use this key to delete all characters
AC
under the cursor.
Entry is completed by touching the
2
keyboard closes.
200
Program after change
K200 Z2
T5
key, and the
Enter