Display And Operation Of Drawing Check - Mitsubishi Electric GT11 User Manual

14.7.3 Display and operation of drawing check

Touching [Drawing check] in the [Display check] displays the screen describing the drawing check operation.
Touch the upper right of the screen to start a drawing check.
Before execute drawing check
1
Upper-left touch
position
Missing bit, Color Check
1
By touching the upper-right part of the screen, the entire screen color changes in the following order:
blue black
Check missing bit and color visually.
Blue Black
If touch the upper right part of the screen at the final color (white screen), the following
check screen is displayed.
Basic figure check
2
Check whether there is no shape transformation of basic figure or display losses.
The basic figure drawn has 4 types: 1. Filled circle, 2. Line, 3. Rectangle, 4. Ellipse.
14 - 118
14.7 Drawing Check
14.7.3 Display and operation of drawing check
Upper-right touch
position
red purple green
Red Purple
(1) Touching the upper right part of the screen proceeds
to the next check in each step during the drawing
check. Touching the upper left part of the screen
returns to the [Display check] screen.
(2) For GT1155 (256 colors), color display (blue, black,
red, purple, green, light blue, yellow and white) is
available.
For GT1150 (monochrome 16 scales), the colors are
reduced to the 16-scale monochrome.
This section describes with an example using
GT1155 (256 colors).
light blue yellow white.
Green Light blue
To (a) Pattern 1 of
Move check among screens
Yellow White
To Basic figure
check screen
Basic figure