Mitsubishi Electric GT11 User Manual page 338

Error
Error message
code
Dedicated device is out of range.
322
Confirm device range.
Insufficient memory media
330 capacity.
Confirm M-card capacity.
Memory card not installed or M-
331
CARD switched OFF
332 Memory media is not formatted.
Memory media error.
334
Replace memory media.
BCD/BIN conversion error.
345
Correct data
Recipe file error.
351
Confirm content of recipe file.
Recipe file make error.
352 Reboot GOT after inserting
memory card.
Unable to write Recipe file.
353
Confirm memory card is inserted.
354 Recipe file write error
355 Recipe file read error
File system error occurred in
356 PLC.
Confirm file register.
18 - 4
18.2 List of Error Message/System Alarm
The monitored device No. is set out of the permissible range of the
targeted PLC CPU, or the data length for a device dedicated to 32 bits is
set other than 32 bits.
1. Set the device within the range that can be monitored by the monitored
PLC CPU and parameter settings.
2. AB: L device/ S7-200: HC device/ OMPON temperature controller: Set
the data length of C0, C1 and C3 devices to 32 bits.
Available memory of the memory card is insufficient.
Check the available memory of the memory card on the Drive Information
of drawing software.
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
The memory card is uninstalled or access switch is OFF in drive.
1. Install the memory card in the specified drive.
2. Turn ON the access switch.
Memory card is not formatted or formatted incorrectly.
Format the memory card.
Memory card is faulty.
Replace the memory card.
The BCD/BIN conversion disabled data is being displayed/input.
1. Change the device data to be displayed to the BCD value.
2. Correct the input value to the 4 digits integer.
The contents of the recipe file are not normal.
1. Confirm the contents of the recipe files in the memory card.
2. Reboot the GOT after deleting the recipe file in the memory card
(format).
Failed to generate recipe file.
Reboot the GOT after installing the memory card.
Failed to write in the recipe file.
1. Confirm the contents of the memory card.
2. Do not pull out the memory card while recipe is operating.
Error occurred while writing in the recipe file.
Do not unplug the memory card while recipe is operating.
Error occurred while writing in the recipe file.
1. Do not unplug the memory card while recipe is operating.
2. Confirm the contents (device value) of the recipe file in the memory
card.
Error occurred in the specified file register when executing the recipe
function by specifying the file register name.
1. Execute the recipe function again after confirming the file register
name.
2. Execute the recipe function again after formatting the PC memory in the
specified PLC CPU drive with GX Developer.
Action
Basic Operation/Data Transfer Manual