Mitsubishi Electric GT11 User Manual page 63

Grounding the cable
3
Use the bus connection cable to ground the cable and grounding wire to the control panel where
the GOT and base unit are installed.
Bus connection cable
FG wire
1) Ground the braided shield portion of the cable to the control panel
with the cable clamp (AD75CK).
Braided shield
Cable clamps
For the cable clamp attaching details, refer to AD75CK-type
Cable Clamping Instruction Manual <IB-68682>.
a) For GT15-C EXSS-1 and GT15-C
Ground the ground wire to the FG terminal of the GOT power supply section.
GOT FG terminal
b) For other bus connection cables Ground
the braided wire for grounding to the control panel by tightening a screw.
5.2.3 Wiring Precautions the Part which Matches the EMC Directives
BS
5.2 EMC DIRECTIVE
1
2
3
4
5
6
7
8
5 - 8