Mitsubishi Electric GT11 User Manual page 186

3 The display format and device comment/no-comment display can be switched
For further information, see the following:
(Test example)
When the entry monitor is displayed
(1) Switching the display format
Word device values are displayed in decimal or hexadecimal numbers on the entry, batch, TC, and
BM monitors.
(2) Device comment display
Comments written in the controller are displayed when a controller device is monitored.
4 Other stations can be monitored
You can monitor other stations in the data link system containing the GOT (or GOT-connected station),
network system or CC-Link system.
For further information about the connection forms that can be monitored, see the following:
14 - 4 14.2 System Monitor
14.1.2 Display operation of debug
Subsection 14.2.7 Switching the display format (DEC/HEX) and comment/no-comment
display
(comment display)
1
Subsection 14.2.1 System configuration
When the entry monitor is displayed
(hexadecimal display)