Mitsubishi Electric GT11 User Manual page 70

Fixing the GOT
3
Engage the hook of the mounting fitting (accessory) to the unit fixing hole of the GOT and tighten the
screw until the GOT is fixed with the mounting bolt (accessory).
The GOT will be fixed in 4 upper/lower parts.
GT1155-QTBD, GT1155-QSBD,
GT1150-QLBD
A protection film is attached on the display section of GOT prior to shipment.
4
Remove the film when the installation is completed.
6 - 7
6.5 Installation Procedure
Enlarged view
Mounting
bracket
Mounting
screw
Cautions on installation
Tighten the mounting screw with the specified torque.
Failure to do so may damage the unit, or distort the panel and make a surface
waviness on the display area, leading to deterioration of the visibility or incorrect
input from the touch panel.
GOT
Tightening torque
GT1155-QTBDQ, GT1155-QTBDA,
GT1155-QSBDQ, GT1155-QSBDA,
GT1150-QLBDQ, GT1150-QLBDA
GT1155-QTBD, GT1155-QSBD
GT1150-QLBD
0.3 to 0.5N•m
Enlarged view
Mounting
bracket
Mounting
screw
GT1155-QTBDQ, GT1155-QTBDA
GT1155-QSBDQ, GT1155-QSBDA
GT1150-QLBDQ, GT1150-QLBDA
0.36 to 0.48N•m