Mitsubishi Electric GT11 User Manual page 158

Data check operation
5
Carries out data check of the selected system file.
When data is normal.
When data is erroneous.
13 - 12
13.2 OS Information
13.2.4 Operation of OS information
Touch button after selecting a
1
Data check
data check target file.
The dialog mentioned left will be displayed
after executing data check.
Touching button closes the dialog.
2
OK
If the data check fails, the target file may be
3
broken.
Install the target file again.
For details of installation, refer to the
4
following.
Chapter 16 INSTALLATION OF
CoreOS, BOOTOS AND
STANDARD MONITOR OS