Mitsubishi Electric GT11 User Manual page 323

Regardless of the types of data (as described in section (a) and (b) above) on the CF card, or
whether the version of the OS to be installed is the same as the current one or newer, a window
that has the version information and a message that asks whether to continue installation will
appear.
<The GOT screen that appears when the Boot OS was installed from the CF card>
Touching the
OK
Touching the
Cancel
(2) Standard monitor OS installation
Match the version of each OS file when installing Standard monitor OS.
Standard monitor OS cannot be installed if the version of each OS file does not match.
When the installation process is discontinued.
Standard monitor OS :
Communication driver :
Option OS
Checking method of BootOS, Standard monitor OS version
1. Check the version of BootOS or Standard monitor OS installed in GOT at [OS
information] of the utility.
Refer to the following for details.
2. Check the version of BootOS installed in GOT at product shipment on the rating
plate on GOT rear face.
(a) GT1155-QTBD, GT1155-QSBD, GT1150-QLBD
16.4 When Installing the Different Version of BootOS, Standard Monitor OS
16.3.2 Installation method using the program/data control function (Utility)
button will start the installation.
button will stop the installation.
1. O. O
2. O. O
: 2. O. O
Please match the number.
Section 13.2 OS Information
GRAPHIC OPERATION TERMINAL
GT1155-QSBD
MODEL
IN 20.4 26.4VDC POWER 9.84W MAX
S/N 540001 BC
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
80M1 IND. CONT. EQ
US LISTED
When the installation process is normally executed.
Standard monitor OS :
Communication driver :
Option OS :
When the Boot OS version is 2 digits,
only the lower digit is printed.
Example H/W version: H
BC
BootOS
version
Rating plate: HD
2. O. O
2. O. O
2. O. O
Boot OS version: AD
16 - 9
9
10
11
12
13
14
15
16