List Of Functions - Mitsubishi Electric GT11 User Manual

14.3.12 List of functions

The table below shows the functions available for each mode.
Mode (mode display)
Writes, adds, or modifies a program.
Changes a device used at the selected step in the program.
Displays a list of instructions that start with the specified character and allows the user to choose from them.
Write (W)
Reads a program after allowing the user to specify a step number.
Declares the specified part of the program NOP.
Displays a comment for the specified device.
Reads a program after allowing the user to specify a step number.
Reads a program after allowing the user to specify an instruction used.
Reads a program after allowing the user to specify a device used.
Read (R)
Automatically scrolls the display of a program that has been read up to a specified step.
Corresponds to program read and automatic scroll functions described above.
Displays a comment for the specified device.
Inserts a new program into the displayed program.
Displays a list of instructions that start with the specified character and allows the user to choose from them.
Reads a program after allowing the user to specify a step number.
Insert (I)
Moves the selected part of the program to a specified part of the program.
Copies the selected part of the program to a specified part of the program.
Displays a comment for the specified device.
Deletes a program at the specified step.
Deletes the specified block in the program.
Delete (D)
Deletes all NOP instructions found in program codes described before the END instruction. (NOPLF instructions will not be
deleted.)
Displays a comment for the specified device.
Clears all parameters in the ACPU only.
Parameter (P)) Sets or changes various parameters like those for the memory capacity, timer/counter, and latching range.
Sets or changes a keyword.
Changes values set to timer/counter devices.
Displays details of an error in the ACPU and the associated step number.
Checks duplex coils, instruction codes, and other elements in the program.
With regard to a special function unit of the specified I/O number, monitors the contents of the buffer memory at the
specified address.
Monitors the ACPU clock (D9025 through D9027).
Clears all contents of the ACPU memory and resets it to the initial state.
Others (O)
Clears the program (Main/Sub) currently selected.
Clears all device memories except for special-D, special-M, and R.
Switches the target ACPU in GOT operations in each mode.
Switches the target program (Main/Sub) in GOT operations in each mode.
Forcibly changes the ACPU running status between RUN and STOP.
Performs a read or write operation to the ACPU memory in the machine language.
Function
14.3 MELSEC-A List Editor
14.3.12 List of functions
9
10
11
12
13
14
15
16
14 - 65