Operating The System Alarm Display - Mitsubishi Electric GT11 User Manual

14.11.3 Operating the system alarm display

System Alarm display resetting
1
Touch.
(1) Before resetting System Alarm display
Eliminate each cause before resetting system alarms.
Without eliminating causes, System Alarm display cannot be reset even when
touching the [Reset] button.
(2) Processings with reset operation
The following data in the system information are also reset.
• GOT error code (Write device)
• GOT error detection signal (System Signal 2-1.b13)
Eliminate each cause of the system alarm
1
being occurred.
Error causes can be identified by the error
code, error message and channel No.
displayed on the System alarm display
screen.
( 18. ERROR MESSAGE AND
SYSTEM ALARM)
Reset
Touch the
2
alarms.
14.11 System Alarm Display
14.11.3 Operating the system alarm display
button to reset system
14 - 129
9
10
11
12
13
14
15
16