Overview - Mitsubishi Electric GT11 User Manual

1. OVERVIEW

About GOT
1
A GOT is installed on the panel surface of a control panel or operating
panel and connects to the PLC within the control panel. The GOT
carries out switch operation, lamp display, data display, message
display, etc.
For the display screen, two kinds of screens are available : user screen
and utility screen.
(1) User screen
The user screen is a screen drawn by drawing software.
The objects [Touch switch], [Lamp display], [Comment display], and [Numeric display] can be
arbitrarily arranged on the display.
A "horizontal format" or "vertical format" may be selected for displaying a user's project.
Moreover, multiple screens created within drawing software can be individually selected or
overlapped for the display.
For details, refer to the following.
GT Designer2 Version
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual
(2) Utility Screen
The utility screen is a factory drawn horizontal screen that cannot be edited.
Installing the BootOS or Standard monitor OS in the GOT from drawing software, the utility screen
is displayed.
The utility screen has options for [Brightness/contrast], [Memory check], etc, and the format is
horizontal only.
For details, refer to the following.
Chapter 9 to Chapter 15
Basic Operation/Data Transfer Manual
Screen Design Manual
PLC
Connector for
program
GOT
1 - 1
1
2
3
4
5
6
7
8