Mitsubishi Electric GT11 User Manual page 214

(2) The following table describes the key functions displayed on the Batch Monitor screen.
Key switch
Activates the Quick test operation.
TEST
Switches the screen to the functional change menu screen to activate another monitor function or terminate the system
monitor function.
MENU
Switches the screen to the display format switching screen to change the value display format (DEC/HEX) on the Batch
Monitor screen or comment/no-comment display.
FORM
Switches the screen to the Device entry screen to enter or test monitor devices.
SET
Scroll displayed information upward or downward by a line to display the preceding or next monitor device that is not
currently displayed. When five or more monitor devices are entered, these switches are available when their comments
are displayed.
(3) The following table below describes the range of display of items 1) to 10) displayed.
No. Item
1) Net No.
2) Station No.
3) CPU No.
4) Bit device ON/OFF
5) Comment
6) Word device value
7) Device No.
8) Device name
9) Data range
10) Monitor display area
*1: Indicates CC-Link connection (via G4).
14 - 32
14.2 System Monitor
14.2.15 Information displayed on the Batch Monitor screen and key functions
Subsection 14.2.8 Quick test operation of monitor devices
Subsection 14.2.9 Changing screens (common operation)
Subsection 14.2.7 Switching the display format (DEC/HEX) and comment/no-comment display
Entering monitor devices :
Test operation : Subsection 14.2.24 Test operation
: Scrolls information upward by a line.
: Scrolls information downward by a line.
Bus connection
0 to 4: This item must be set only when the system is connected to multiple QCPUs. It is not necessary when the
system is connected to another CPU.
: ON
: OFF
Displays a comment (maximum number of characters: 16 one-byte characters).
A comment is displayed when
[Decimal number]
16-bit (one-word) module: Six digits (including a digit for a sign) are displayed. (Display example: -12345)
32-bit (two-word) module: Ten digits (including a digit for a sign) are displayed. (Display example: -123456789)
[Hexadecimal number]
16-bit (one-word) module: Four digits are displayed. (Display example: H AB12)
32-bit (two-word) module: Eight digits are displayed. (Display example: H ABCDE123)
Up to 16 devices can be entered when the data range is word (16 bits).
Up to eight devices can be entered when the data range is two-word (32 bits).
For further information about device numbers and names that can be entered:
GT Designer 2 Version
GT Designer 3 Version1 Screen Design Manual (Fundamentals)
DW: Indicates that the device value is a 32-bit (two-word) module.
Nothing displayed: Indicates that the device value is a 16-bit (one-word) module.
When no comments are displayed
When comments are displayed
Function
Subsection 14.2.5 Entering monitor devices (specifying monitor stations and devices)
Description of setting
Computer link
Direct CPU connection
connection
FF
" "
DISPLAY is selected for comment display on the display format switching screen.
Screen Design Manual
: Up to 16 devices can be displayed at a time (monitor module: one-word).
Up to eight devices can be displayed at a time (monitor module: two-word).
: Up to eight devices can be displayed at a time (monitor module: one-word).
Up to four devices can be displayed at a time (monitor module: two-word).
CC-Link connection
0
FF: When the host station is selected
0: When the master station is selected
1 to 64: When a local station is selected
1
G4*