Mitsubishi Electric GT11 User Manual page 188

Connection type
3
(1) When the GOT is connected to a QCPU (Q mode), Q series motion controller CPU, or QSCPU
Function
Name
Monitoring present values by
Entry
entering devices to be monitored
monitor
in advance
Monitoring the present value of n
Batch monitor
devices from a specified device
Monitoring the present value, set
TC monitor value, contact point, and coil of m
devices from a specified device
Monitoring the present value of x
devices in specified buffer memory
BM monitor
of a specified intelligent function
module
Setting/Resetting bit devices
Changing the present value of
word devices and buffer memory
Data
change by test
Changing the present value of TC
operation
(possible during TC monitoring)
Changing the set value of TC
(possible during TC monitoring)*
Changing device values by
Quick test
performing a quick test
Displaying device comments
Displaying word device and buffer
Display switching
memory values in decimal or
hexadecimal
*1 These items cannot be monitored when a motion controller (Q series) is monitored.
*2 The present value of Z cannot be changed. None of the connection types supports V.
*3 When a motion controller (Q series) is connected, device comments cannot be displayed.
*4 Indicates CC-Link connection (via G4).
*5 When a QCPU redundant system is used, data of the set value cannot be changed.
*6 The QSCPU does not support the connection type.
14 - 6
14.2 System Monitor
14.2.1 Specifications
Bus
Description
connection
*6
*
*
5
Connection type between GOT and controller
Direct CPU Computer link
connection connection
*6 *6
1 1 1
* *
2
*
3 3
*
3
*
( : Available, : Partly restricted,
CC-Link
GOT multidrop
connection
connection
*4*6
G4
1
*
3
*
: Unavailable)
Reference
Subsection 14.2.10
Subsection 14.2.14
Subsection 14.2.17
Subsection 14.2.21
Subsection 14.2.24
Subsection 14.2.8
Subsection 14.2.7