Dispensing Steam; Dispensing Hot Water; Programming The Hot Water; Automatic Steam Wand - Wega URBAN EVDP Manual

6.6 Dispensing steam

Do not direct the steam towards hands or other
parts of the body. Do not touch the steam nozzles
with bare hands; use the appropriate PPE.
• Immerse the steam nozzle into the
liquid to be heated.
• Rotate the valve knob anticlockwise.
• The quantity of steam will be
proportional to how open the valve
is.
• To stop dispensing, turn the valve's
knob clockwise.
To optimally froth the milk, follow these simple rules:
• Only heat the amount of milk that you intend to use; once
heated, it will have to be completely poured out of the jug
and cannot be reheated.
• Start frothing the milk when it reaches a temperature of
approximately 4°C.
Before using the steam nozzle, the condensation
draining operation must always be carried out for
at least 2 seconds.
To keep the steam nozzle tips in perfect working
order, it is advisable to carry out a brief dry dis-
pensing run after each use. Keep the tips clean at
all times using a cloth dampened in lukewarm water. Only
leave the steam nozzle immersed in the milk for the time
needed to heat it.
Do not open the steam valve with the steam wand
immersed in milk and the machine switched off, as
the latter would suck milk into the pipes.
USER manual

6.7 Dispensing hot water

Danger of scalding. Do not direct hot water to-
wards hands or other parts of the body. Do not
touch the hot water nozzle with bare hands; use
the appropriate PPE.
• Place the jug under the hot water
nozzle.
• Press the water button
for the water to be dispensed.
• To stop coffee dispensing ahead of
time, press the water button
again.
6.7.1

Programming the hot water

The machine is programmed by default. Should the hot water
doses need to be modified, see para. 7.3.1 on page 49.

6.8 Automatic steam wand

Tips regarding its use

6.8.1
• Only froth the amount of milk that you intend to use; once
heated, the milk will have to be completely poured out of
the jug and cannot be reheated.
• The automatic steam wand only guarantees an accuracy
of ± 3°C between the set temperature and the actual milk
temperature, if the starting milk temperature is 4°C.
• As the steam automatically stops dispensing when the set
milk temperature is reached, only fill the jug half way in
order to prevent the milk froth from spilling out.
• Use a suitably-sized jug for the amount of milk that re-
quires frothing (approx. 200 ml is recommended) and
make sure that it is circular and not conical (see the im-
age).
URBAN
and wait
45 204
of