Dispensing With The Automatic Steam Wand; Dispensing Cappuccinos; Cup Warmer - Wega URBAN EVDP Manual

URBAN
6.8.2 Dispensing with the automatic
steam wand
Do not direct the steam towards hands or other
parts of the body. Do not touch the steam nozzles
with bare hands; use the appropriate PPE.
Before using steam to heat and froth the milk, a
dry dispensing run must be completed by pressing
one of the selection buttons to let out several short
spurts of air, until all the condensation water has been re-
leased. To stop dispensing, press the same button again.
• Immerse the automatic steam wand nozzle tips into the
milk.
• Press the desired button, e.g.
wait for the steam to be dispensed.
• Wait until the dispensing process has
been completed.
• To stop dispensing ahead of time, press
the same button
Automatic
steam wand 1
Automatic
steam wand 2
Keep the tips clean at all times using a cloth damp-
ened in lukewarm water. Milk can be kept in the
fridge for a maximum of 3-4 days.
Only leave the steam nozzle immersed in the milk
for the time needed to heat it.
To change the automatic steam wand's tempera-
ture or adjust the milk froth, call out the Techni-
cian.
46 204
of
, and
again.
Manual
steam

6.9 Dispensing cappuccinos

• Put the suction tube in the milk.
• Place the jug under the spout of the
cappuccino maker.
• Open the steam valve and when the de-
sired amount has been obtained, close
the steam valve.
• Pour the frothed milk into the cups with
the coffee.
To obtain hot
non-frothed milk,
lift the cappucci-
no maker flap upwards. For
better results, we suggest
that you do not dispense
directly into the coffee cup, but into a jug or pot, and then
pour the frothed milk on top the coffee. Be sure to constant-
ly keep the cappuccino maker clean, by following the instruc-
tions provided in paragraph 8.8 on page 56.

6.10 Cup warmer

For safety reasons, we do not recommend placing
cloths or other objects on the cup warmer shelf in
order to prevent the machine from overheating.
HIGH TEMPERATURE HAZARD: the cup warmer
can reach temperatures that may cause burns. Be
very careful.
Place the cup(s) to be heated on the appropriate support (13).
To activate the cup warmer, press the
When the bottom of the button turns red, the cup warmer is
on.
To change the temperature of the cup warmer, see
para. 7.3.2 on page 50.
13
button.
USER manual